Woodward EasyGen 1000

The innovative features of the easYgen-1000, including flexible breaker configuration and start-stop logic, real and reactive power sensing and remote-start capability make it the intelligent choice for specialized mobile power and emergency stand-by applications.

FEATURES:

• Configure for 1 or 2 breakers in open transition.
• Flexible start-stop logic for diesel and gas engines.
• 3-phase, true RMS generator voltage sensing.
• Remote start and annunciation.
• CT input for power sense and current monitoring.
• Complete generator protection and mains monitoring with configurable trip levels, delay timers and alarm classes.
• Multi-lingual capability: 10 languages

Woodward EasyGen 2000

Parallel Applications

The easYgen-2000 is a compact, affordable genset control and protection package for load sharing up to 16 gensets in island operation, or parallel operation of a single unit with a utility.

 FEATURES:

• Load share 16 gensets in island mode, or parallel a single genset to a utility.
• Control 0, 1 or 2 breakers, open or closed transition, synchronization and soft load/unload.
• LogicsManagerTM Boolean programmability for complex system control.
• Process dependent start-stop logic.
• Multi-lingual capability: 10 languages.
• Complete engine & generator protection and mains monitoring.
• Asynchronous (inductive) and synchronous generator support.

Woodward EasyGen 300

Non Parallel Applications

The easYgen-300 is an affordable, value-packed gen-set control for auto start and transfer switches operations.

 FEATURES:

• Single-breaker or two-breaker options.
• Configurable for open-and-close breaker control.
• Breaker position monitoring.
• 1-phase and 3-phase configurable voltage sensing options.
• Generator protection.
• CAN option for common J1939 alarms.
• Digital display for voltage and frequency measured values, alarm annunciation and counters.
• Password-protected PC and front-face programmability

Woodward EasyGen 3000

Parallel Applications

The easYgen-3000 is an exceptionally versatile genset control and protection package with all the flexibility and features needed to fit a wide range of power generation applications.

FEATURES:

• Load share 32 gensets in island mode, or paralleled to a single utility.
• Load-dependent start/stop.
• Control 0, 1 or 2 breakers, open or closed transition, with synchronization and soft load/unload.
• RP-3000 remote panel compatable.
• Complete engine/generator protection + mains monitoring.
• Advanced communication (CNopen, J1939 and Modbus) so engine ECU’s, PLC’s, HMI, SCADA and external I/O.
• Multi-lingual capability: 11 languages.

Woodward easYlite-100

Expansions Modules

The easYlite-100 is designed to remotely display the status of a generator control system through a CAN bus Interface. The easYlite-100 may be used where an additional status display is required, which is directly connected to the generator control unit.

Woodward EGCP-2

Parallel Applications

Woodward’s EGCP-2 is a microprocessor-based complete generator control and engine management package. It is designed for use with an automatic voltage regulator and a speed control to automate and protect diesel or gas engine based generator sets.

 • Engine Control
• Gen-Set Synchronizing
• Automatic Sequencing of Multiple Units
• Automatic Start/Stop Control
• Digital Display of Engine and Generator Data
• Real kW Load Control
• Reactive kVAR Control
• Gen-Set Protection
• Engine Protection
• Modbus® Communications

Woodward EGCP-3

Parallel Applications

Woodward’s EGCP-3 genset controller series, designed for medium- and large-sized generators, provides advanced IEEE protection algorithms, revenue-grade metering, and individual control of utility and inter-tie breakers. The EGCP-3 also offers backward compatibility with Woodward DSLC™ and MSLC™ synchronizers. A network of up to 16 EGCP-3 controls can handle your most sophisticated base-load, peak shaving, or backup power generation applications.

Based on Woodward’s powerful GAP™ application programming tools, we can easily customize the EGCP-3.

EGCP-3 LS, EGCP-3 MC,

 • Automatic load demand sequencing of multiple units
• Synchronization of breakers or contactors
• Comprehensive system protection – engine, bus, and generator
• Utility monitoring
• Revenue-grade power and energy metering
• Digital display of engine, bus, generator, utility, and system data
• Real kW and reactive kVAR load sharing and control
• Advanced network communications with Echelon® and Modbus® networks
• DSLC™ compatible (not compatible with manually bound

Woodward GCP-30 Series

Parallel Applications

Woodward’s GCP-30 Series genset controllers are designed to provide total control for multiple, medium- to large-sized applications. A network of the compact, versatile GCP-30 controls is capable of controlling up to 14 gensets with automatic sequencing. Load management features include automatic base loading/peak shaving, import/export control, and emergency power/back up power generation. The GCP-30 Series is well known in the market for highly reliable soft- and hardware.

 FEATURES:

• True RMS voltage and current sensing for Generator, Bus, and Mains
• Complete engine/generator protection, plus mains monitoring
• Relay manager for programming relay outputs according to selectable discrete and analog conditions.
• Load share 14 gensets in island mode or paralleled to the utility
• Different load or process dependent start/stop sequencing modes with active and reactive power load sharing
• Communication to engine ECU’s (CAT, MDEC, J1939 based protocols), PLC’s, external I/O extension cards
• Connection to Woodward LS4 to run multiple breaker applications • Configurable discrete Inputs and Relay Outputs

Woodward GCP-31 Rental

Parallel Applications

Woodward’s GCP-31 Rental Genset Controller (Package RPQ+SC09) is especially designed to meet the needs of the rental generator market. Discrete inputs are provided to choose from different sets of rated voltages and frequencies.

 • active and re-active power load sharing
• load-dependent start/stop
• emergency power/back up power generation

Woodward IKD 1

Expansions Modules

The IKD 1 is an I/O extension board. It allows an additional 8 discrete inputs and 8 relay outputs to be connected via CAN bus to the Woodward generating set controllers series GCP-30 and easYgen.

It is possible to connect multiple Woodward IKD 1 cards to each of the genset controllers. The IKD 1 can be programmed via a PC configuration tool or directly via LogicsManagerTM in the easYgen eries controllers. Configuration of text name for the I/O, alarm classes, NO (Normally Open) and NC(Normally Closed) relay contact configuration and delay timers is possible.

 • 8 configurable discrete alarm inputs
• 8 configurable relay outputs (dry, two pole isolated)
• Configurable delays for each input
• CAN bus communication
• PC configurable

Woodward LS-4

Parallel Applications

Woodward’s LS-4 is a breaker control and protection module used to expand the number of controlled breakers in a power generation and distribution system. The LS-4 is applied when you need to control, synchronize, and protect multiple main feeders or bus tie breakers.

 • True RMS current and voltage sensing
• Synch-check and synchronization features
• Dead bus start functionality
• Soft loading and Unloading sequencing
• Breaker Monitoring features
• Mains Decoupling features

Woodward LS-4

Parallel Applications

Woodward’s LS-4 is a breaker control and protection module used to expand the number of controlled breakers in a power generation and distribution system. The LS-4 is applied when you need to control, synchronize, and protect multiple main feeders or bus tie breakers.

 • True RMS current and voltage sensing
• Synch-check and synchronization features
• Dead bus start functionality
• Soft loading and Unloading sequencing
• Breaker Monitoring features
• Mains Decoupling features

Woodward LS-5

Parallel Applications

The LS-5 Series are synchronizer and load share controllers with integrated protective functions. They are designed to enable complex power management applications with multiple incoming mains and bus breakers in combination with easYgen-3400/3500 equipped genset controllers.

The LS-5 Series is available in two versions:

• The back panel mounted LS-511 has a rugged aluminum chassis for use in harsh environments or confined spaces.
• The front panel mounted LS-521 has sealed soft keys and an easy to read backlit LCD multilingual graphical display

Woodward RP-3000

Expansions Modules

Woodward’s RP-3000 is a remote control and annunciation panel for use with the back-panel mounted easYgen-3100/3400 or door-mounted easYgen-3200/3500 genset controls. The RP-3000 is an ideal solution for door-mounted applications, providing control from the front panel with greatly-reduced wiring to the access door, while keeping high-voltage connections located safely on the back panel.

 • Remote annunciation and remote control of the easYgen-3000 Series generator controls
• Password-protected remote configuration for all parameter settings
• Same look and feel as the easYgen-3200/3500 display
• CAN communication to genset control
• Ready for operation relay output

Woodward SYNCONpanel

Woodward SYNCONpanel

         Expansions Modules

Woodward’s SYNCONpanel is used to connect a mobile generating set to an MCP (mains coupling point). The mains coupling device in this application is a manual operated breaker, connector, or fuses

For connecting the mobile generating set, integrated current sensing at the SYNCONpanel transfers the load from the mains to the generating set by soft loading. This enables the user to remove fuses or connectors without load.

 • True RMS voltage (A and B side)
• True RMS current (A side)
• Synch-check functionality
• Remote control of frequency, voltage, real power, and power factor
• Zero-phase-angle-control
• Power transfer zero control (softload)
• Two-line LC display