Datcon pick up 71255-00

FEATURES:

 Length: 1.9” • Thread: 3/4” x 16UNF • Wire: 6.5” • Sealed bobbin construction • Anodized aluminum body • Wide operating temperature range: -40°C to 130°C • Numerous connections available, including flying leads and popular connectors in male and female configurations

Datcon pick up 71256-00

FEATURES:

 Length: 3.4” • Thread: 3/4” x 16UNF • Wire: 5” • Sealed bobbin construction • Anodized aluminum body • Wide operating temperature range: -40°C to 130°C • Numerous connections available, including flying leads and popular connectors in male and female configurations

Datcon pick up 71544-00

FEATURES:

 Length: 1.9” • Thread: 5/8” x 18UNF • Wire: 6.5” • Sealed bobbin construction • Anodized aluminum body • Wide operating temperature range: -40°C to 130°C • Numerous connections available, including flying leads and popular connectors in male and female configurations

Datcon pick up 71545-00

FEATURES:

Length: 3.4” • Thread: 5/8” x 18UNF • Wire: 5” • Sealed bobbin construction • Anodized aluminum body • Wide operating temperature range: -40°C to 130°C • Numerous connections available, including flying leads and popular connectors in male and female configurations

Murphy Magnetic Pickup Speed Transducers

MP series magnetic pickups are used with tachometers, speed switches and engine controls to give accurate and reliable measurement of engine speed. The pickup is typically mounted through an engine housing in close proximity to flywheel or gearwheel teeth. The rotation of the metal gear-teeth past the pickup head induces an AC voltage. The AC signal frequency, which is proportional to engine speed, can be measured by suitable instruments or control devices.

FEATURES:

• Proven reliability
• Flying lead or blade connection
• Range of thread sizes, body lengths and body materials

Replaces Datcon pick up 71544-00

FEATURES:

Length: 1.9” • Thread: 5/8” x 18UNF • Wire: 6.5” • Sealed bobbin construction • Anodized aluminum body • Wide operating temperature range: -40°C to 130°C • Numerous connections available, including flying leads and popular connectors in male and female configurations

Woodward Magnetic Pick-Ups

Magnetic Pickups and Proximity Switches for Electronic Controls

FEATURES:

Magnetic pickups (MPUs) are speed sensors that detect the speed of a prime mover, typically an engine or turbine. They are the communication link between your engine and a Woodward electronic governor control. The MPU is installed next to a drive shaft gear made of a material that reacts to a magnetic field. As each gear tooth passes the MPU, the gear interrupts the MPU’s magnetic field, and an alternating voltage is developed. The frequency of this voltage is translated by the speed control into a signal that accurately depicts the speed of the prime mover.

Woodward Mini-Gen® Signal Generators

Woodward’s Mini Gen® Signal Generator develops an AC sine wave that can be used to measure the speed of rotating machinery or engine RPM. Most notably, the Mini Gen is used on over-the-road vehicles where the input is sent to either a tachometer or a speedometer for determining vehicle speed.

FEATURES:

• Mount on standard SAE 7/8-18, and E1 & E2 DIN 75 532 tachometer outputs
• Compact, only 1-3/4″ in diameter
• Long, reliable life under continuous speeds as high as 4000 RPM
• Usable signal at speeds below 20 RPM (10 Hz)
• Output signal frequency 1/2 of shaft RPM
• Rugged zinc die cast construction
• Plated for protection against moisture, salt and dirt
• Optional connectors available