Deep Sea Electronics Auto Start Control Module Model: DSE3110

FEATURES:

The DSE3110 can be utilised as a Manual or Auto Start Module for single generating set applications and forms part of DSE’s next generation of control modules. The module has been designed to work with…

Deep Sea Electronics Auto Start Control Module Model: DSE5110

FEATURES:

The DSE5110 is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also provides excellent engine monitoring and protection features

Deep Sea Electronics Auto Start Control Module Model: DSE5120

FEATURES:

The DSE5120 is an Automatic Mains Failure Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also monitors the mains (utility) supply and provides

Deep Sea Electronics Auto Start Control Module Model: DSE5120

FEATURES:

The DSE5120 is an Automatic Mains Failure Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also monitors the mains (utility) supply and provides

Deep Sea Electronics Auto Start Control Module Model: DSE5220

FEATURES:

The DSE5220 is an Automatic Mains Failure Control Module designed to monitor a mains (utility) supply and automatically start and stop diesel and gas generating sets that include non electronic engines. 

Deep Sea Electronics Auto Start Control Module Model: DSE5310

FEATURES:

The DSE5310 is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic and electronic engines. The Generator Controller also provides advanced engine

Deep Sea Electronics Auto Start Control Module Model: DSE5320

FEATURES:

The DSE7310 is a control module for single gen-set applications. The module incorporates a number of advanced features to meet the most demanding on-site applications.  The DSE7310 is an Automatic Start Control Module

Deep Sea Electronics Auto Start Control Module Model: DSE7210

FEATURES:

The DSE7210 is control module for single gen-set applications. The Generator Controller incorporates a number of advanced features to meet the most demanding on-site applications. The DSE7210 is an Automatic Start Generator Control Module

Deep Sea Electronics Auto Start Control Module Model: DSE7220

FEATURES:

The DSE7220 is a control module for single gen-set applications. The module incorporates a number of advanced features to meet the most demanding on-site applications. The DSE7220 is an Auto Mains (Utility) Failure Control Module

Deep Sea Electronics Auto Start Control Module Model: DSE7310

FEATURES:

The DSE7310 is a control module for single gen-set applications. The module incorporates a number of advanced features to meet the most demanding on-site applications.  The DSE7310 is an Automatic Start Control Module designed

Deep Sea Electronics Auto Start Control Module Model: DSE7320

FEATURES:

The DSE7320 is a generator controller for single gen-set applications. The module incorporates a number of advanced features to meet the most demanding on-site applications.  The DSE7320 is an Auto Mains (Utility) Failure Generator Control

Deep Sea Electronics DSE703

FEATURES:

The DSE703 is an Automatic Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor over speed, under speed, high engine temperature, low oil

Deep Sea Electronics DSE704

FEATURES: 

The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start

ENKO AMF 1.0

FEATURES:

AMF1.0 Automatic Mains Failure unit is a microprocessor based digital control unit.

ENKO AMF 2.0

FEATURES:

AMF2.0 offers all necessary control functions for single Generator/Mains applications.

ENKO AMF 3.1 NEW

FEATURES:

AMF3.1 offers versatile control functionsfor single or multiple Generator/Mains applications.

ENKO AMF 3.2 (NEW)

FEATURES:

AMF3.2 offers flexible control functions for single and multiple Gen- Set applications where high number of peripheral controls is required.

ENKO AMF 3.4 (NEW)

FEATURES:

AMF3.4 is designed with high demanding applications in mind. Highly flexible menu offers very specific applications for the user.

ENKO AMF 3.4L (NEW)

FEATURES:

AMF3.4L is designed with high demanding applications in mind. The unit is equipped with LCD Graphic display for simple and efficient user interface. User can select the display language.

ENKO AMF 4.0

FEATURES:

AMF4.0N offers flexible control of load power, fed from mains and generator bus-bars.

ENKO AMF 5.1 (NEW)

FEATURES:

AMF5.1 provides embedded intelligence for Gen-Set control applications, where high integration flexibility and “on-site” system monitoring is required

ENKO AMF 5.2 (NEW)

FEATURES:

AMF5.2 is equipped with Graphical LCD Display and provides embedded intelligence for Gen-Set control appli-cations, where high integration flexi-bility and “on-site” system monitoring is required

ENKO ESR 1.0

FEATURES:

ESR 1.0 control unit is used for starting, stopping and controlling any diesel or gasoline engine. The control unit provides full protection of the engine parameters, ESR 1.0 protects the engine against the failures by monitoring oil pressure, engine temperature, auxiliary fail inputs and charge alternator failure.

ENKO ESR 1.1

FEATURES:

ESR 1.1 is used for starting and stopping any diesel and gasoline engine while providing full protection for the engine.  ESR 1.1 is also provided with alternator phase voltage input terminals so that the unit can monitor and protect the generator against over/under speed failures. The 7-segment LED display in order to display the alternator frequency on the front panel, Other features include monitoring of oil pressure, engine temperature, auxiliary fail input and charge alternator failure.

ENKO ESR 3.1

FEATURES:

ESR 3.1 engine starter relay offers excellent functions for manual control of diesel and gasoline engine powered generators. The operator can start and stop the engine automatically from the front panel push buttons, the unit also provides remote starting of the generator via an external signal. ESR 3.1 is also provided with alternator phase voltage input terminals so that the unit can monitor and protect the generator against over/under speed and over/under voltage failures automatically. All these readings can be rolled on the display via the push button on the front panel. The control unit contains a 5 digit 7-segment LED display. The operator can monitor the alternator frequency, engine rpm, working engine hours from the front panel, thus avoiding the use of analog type meters on the control cabin. Other features include monitoring of oil pressure, engine temperature, auxiliary fail input and charge alternator failure.

ENKO ESU 1.0

FEATURES:

The ESU 1.0 and ESU 1.0S can be used as a simple engine start and engine parameters indicator unit. On ESU 1.0S model there is also engine protection property. All units have standard interfaces like oil pressure switch input, water temp switch input, oil pressure resistive input, water temp resistive input, oil temp resistive input, fuel level resistive input, cranking and fuel selenoid outputs (On ESU 1.0S model, fuel selenoid output is controlled by 16A relay contacts(N.C.) to stop the engine), battery charge current sensor input, alternator charge voltage input/excitation output, magnetic pick-up and alternator W+ input to measure engine RPM

ENKO MSU 2.0

FEATURES

MSU2.0 Manual Start Unit is a micro-controller based digital control unit, which is used to start and stop any diesel or gasoline engine powered generator in manual stand alone applications.

ENKO MSU 3.1

FEATURES:

MSU3.1 offers versatile control functions for single or multiple Generator control applications with flexible load control

ENKO MSU 3.4L

FEATURES:

MSU3.4L is designed for single Generator applications with Load Management. The unit is fitted with LCD Graphic display for simple and efficient user interface. User can select his own display language.

ENKO MSU 4.0

FEATURES:

MSU 4.0 P is a microcontroller based generator control unit that is used to start and stop the genset manually. The device is designed to run, watch over the system parameters to maintain fail-safe operation. MSU 4.0P contains digital displays providing functions of most analog displays needed in generator panels

Woodward EasyGen 1000

FEATURES:

The innovative features of the easYgen-1000, including flexible breaker configuration and start-stop logic, real and reactive power sensing and remote-start capability make it the intelligent choice for specialized mobile power and emergency stand-by applications.

Woodward EasyGen 2000

The easYgen-2000 is a compact, affordable genset control and protection package for load sharing up to 16 gensets in island operation, or parallel operation of a single unit with a utility.

 

FEATURES:

• Load share 16 gensets in island mode, or parallel a single genset to a utility.
• Control 0, 1 or 2 breakers, open or closed transition, synchronization and soft load/unload.
• LogicsManagerTM Boolean programmability for complex system control.
• Process dependent start-stop logic.
• Multi-lingual capability: 10 languages.
• Complete engine & generator protection and mains monitoring.
• Asynchronous (inductive) and synchronous generator support

Woodward EasyGen 300

The easYgen-300 is an affordable, value-packed gen-set control for auto start and transfer switches operations.

 FEATURES:

• Single-breaker or two-breaker options.
• Configurable for open-and-close breaker control.
• Breaker position monitoring.
• 1-phase and 3-phase configurable voltage sensing options.
• Generator protection.
• CAN option for common J1939 alarms.
• Digital display for voltage and frequency measured values, alarm annunciation and counters.
• Password-protected PC and front-face programmability.

Woodward EasyGen 3000

The easYgen-3000 is an exceptionally versatile genset control and protection package with all the flexibility and features needed to fit a wide range of power generation applications.

 FEATURES:

• Load share 32 gensets in island mode, or paralleled to a single utility.
• Load-dependent start/stop.
• Control 0, 1 or 2 breakers, open or closed transition, with synchronization and soft load/unload.
• RP-3000 remote panel compatable.
• Complete engine/generator protection + mains monitoring.
• Advanced communication (CNopen, J1939 and Modbus) so engine ECU’s, PLC’s, HMI, SCADA and external I/O.
• Multi-lingual capability: 11 languages