ASM720 Auto Start Module

FEATURES:

These modules provide automatic start-stop control from a remote contact and subject to the build variant, manual override. A wide range of engine monitoring and protection circuits are provided for diesel, petrol and gas powered systems. Mode control variants include … ASM720A … Rotary Knob selects ‘Off – Auto – Manual’ ASM720K … Keyswitch selects ‘Auto – Off – Manual’ ASM720N … (external mode-control) ASM720P … Push-buttons for manual stop, start and mode selection All of the above can sense engine speed from the main alternator frequency with switch selection for 50/60Hz operation. Via separate inputs, the ‘A’ and ‘P’ variants can also sense speed from a Magnetic Pick-up, Charge Alternator or tachometer. With a correctly fitted panel gasket, the ‘N’ and ‘P’ variants also offer good weather protection to the front of the modules. The Hours Run counter is an optional extra. The ASM720 series incorporate proven microprocessor technology for maximum flexibility in standard as well as custom builds. Optically coupled inputs ensure excellent noise rejection and five protected driver outputs allow provision for contactor control in base-load and AMF solutions. User adjustment is provided via the rear accessed switches and potentiometers. This compact design includes an easy-fit locking sleeve and two-piece connectors. Designed and manufactured in England by Capricorn Controls with customer-specific hardware and software available to order.

ATS15-225

FEATURES:

• Rate Current: 15~225 Amp

• Enclosure Dimensions: 860(H) x 540(W) x 280(D) mm

ATS250-400

FEATURES:

• Rate Current: 250~400 Amp

• Enclosure Dimensions: 1000(H) x 700(W) x 330(D) mm

ATS500-1200

FEATURES:

• Rate Current: 500~1200 Amp

• Enclosure Dimensions: 1800(H) x 820(W) x 670(D) mm

ATS500-800

FEATURES:

• Rate Current: 500~800 Amp

• Enclosure Dimensions: 1800(H) x 820(W) x 670(D) mm

ATS800-1600

FEATURES:

• Rate Current: 800~1600 Amp

• Enclosure Dimensions: 1800(H) x 820(W) x 670(D) mm

Automatic Transfer Switch Model : TPPS2A

FEATURES:

100 Ampares / 4 Pole

Rated Voltage : AC440V

Rated Frequency : 50/60 Hz

Automatic Transfer Switch Model : TPPS2B

FEATURES:

100 Ampares / 4 Pole

Rated Voltage : AC440V

Rated Frequency : 50/60 Hz

Capricorn ATM72

FEATURES:

The ATN72 Auto Transfer Module is typically employed with the RSM72 Remote Start Module to provide an economical yet highly versatile AMF system. However, it can also operate as a “stand alone” module to upgrade

Double Throw Heavy duty ATS with Center Off, 125 Amps

FEATURES:

Rated Voltage  600VAC
Rated Current  125A
Rated Frequency 50/60HZ
Transfer   Double ThrowT ype
OperatingCurrent  2.0A @ 220V
Poles      3P
Rated Short-Time Current  3.0KA/1Sec@250VAC
Short Circuit Peak Value    7.5KA
Utilization Category   AC-33A*
Life         >6000Times/WithLoad
ENKO AMF 2.0

FEATURES:

AMF2.0 is a full Automatic Mains Failure unit intended to be used for single Gen-Set applications. The controller can be used with single or three phase mains systems. Full Generator control functions can be implemented through the unit program menu. The unit has a configuration parameter menu which can be accessed from the front panel. All engine parameters can be monitored and full engine protection is provided

ENKO AMF 3.4 (NEW)

FEATURES:

AMF3.4 is designed with high demanding applications in mind. Highly flexible menu offers very specific applications for the user.

ENKO AMF 3.4L (NEW)

FEATURES:

AMF3.4L is designed with high demanding applications in mind. The unit is equipped with LCD Graphic display for simple and efficient user interface. User can select the display language

ENKO ATS 1.1

FEATURES:

ATS 1.0 automatic transfer unit is monitoring the 3 phases of the mains and controls the changeover of mains and generator contactors if a mains failure on any phase is detected.

ENKO ATS 1.x

FEATURES:

ATS1.1 and ATS1.0 are both Load Transfer Control Switches, which monitors the Mains Bus-Bar voltages and transfer the load if the volt-age limits fall beyond required tolerances. These units can be used with any two voltage bus-bars, where the load is required to be con-trolled according to their availability. All three phase voltages are monitored on the mains bus-bar side and each phase can have inde-pendent upper and lower voltage limits.

ENKO ATS 2.0

FEATURES:

ATS2.0 is a very versatile load transfer switch, intended to be used in most demanding applications. Can control pulse type breaker modules directly from its output ports

Murphy ASM150 Automatic Engine Controller

FEATURES:

The ASM150 is a user friendly, solid-state, automatic engine controller. It provides basic automatic start/stop capabilities plus other features found on more sophisticated and expensive controllers.

• Ideal for generators

• Solid-state construction

• Compatible with most new or existing murphy Swichgage® monitoring systems

• Advanced, rugged, reliable microprocessor based design

• Built-in crank disconnect and overspeed switch

• First-out shutdown LED

RSM72 Remote Start Module

FEATURES:

These modules provide automatic start-stop control from a remote contact and subject to the build variant, also manual override and other features. A wide range of engine monitoring and protection circuits are provided for diesel, petrol and gas powered systems. All variants can sense engine speed from the main alternator frequency and are adjustable for 50/60Hz operation. Magnetic Pick-up, Charge Alternator or tachometer sensing is also available but must be specified with order. The RSM72 incorporates well proven technology to provide maximum flexibility for both standard as well as customised builds. User adjustment is provided via accessible switches and potentiometers. This compact design includes an easy-fit locking sleeve together with two-piece connectors. Standard mode control varients include … RSM72A rotary knobOff – Auto – Manual RSM72B rotary knob : Off – Lamp Test – Auto – Manual RSM72C rotary knob : Off – Lamp Test – Auto – Manual RSM72D rotary knob : Off – Lamp Test – Auto – Test Off-Load RSM72F (external mode control if required) RSM72G rotary knob Off – Auto – Man – Test RSM72K key-switch : Auto – Off – Manual Designed and manufactured in England by Capricorn Controls with customer-specific builds available to order.

Woodward DTSC-200

FEATURES:

Woodward’s DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open, delayed, or closed-transition transfer with synch-check to ensure the smoothest possible transfer.

 • Configurable for open, delayed, and closed transition transfer

• Configurable for Utility-to-Gen, Generator-to-Generator, and Utility-to-Utility applications

• Closed transition transfers can be accomplished in times < 100ms

• In-phase monitoring (sync-check)

• Load/no load test functionality

• Engine exerciser (load/no load test) routine with fully adjustable interval

• Peak shaving mode

• Load shedding

• Extended parallel time (for closed transition transfers that take longer than 100ms)

• Transfer and/or re-transfer inhibit

• Source priority selection

• Elevator pre-transfer and motor load disconnect timers

Woodward DTSC-50

FEATURES:

Woodward’s DTSC-50 digital transfer switch controller is an economical controller for open-transition (break before make) ATS (automatic transfer switch) control for emergency stand-by applications with a single generator. When the DTSC-50 detects a utility failure, it commands the generator to start and transfers the load to the emergency source. The DTSC-50 performs an open-transition re-transfer when utility power is restored, allowing the engine to cool down before stopping. It can be utilized in 1Ph2W, 1Ph3W, 3Ph3W, and 3Ph4W systems.

 • Open-transition transfer

• Utility-to-Generator application

• Auto/manual operation

• “Remote start” input

• “Lock in AUTO mode” input

• “Lock in MANUAL mode” input

• Adjustable timers

• Event/Alarm log system

• Freely configurable discrete I/O

• PC and/or front display configuration

• Six 7-Segment LED screen

• True RMS voltage sensing